PRODUCT INTRODUCTION
Neutral Degreasing Powder & Degreaser is a high-performance industrial cleaning product designed to remove oil, grease, dirt and organic contaminants from metal surfaces and industrial parts. It operates under near-neutral pH conditions and helps reduce corrosion risk during surface preparation.
This product is widely used in metal surface treatment, electroplating pre-treatment, painting pre-treatment, aluminum profile cleaning, stainless steel cleaning and industrial equipment cleaning. It provides strong degreasing, good rust prevention, low foam, easy rinsing and stable cleaning performance.
Our neutral degreasing powder and degreaser is produced under strict process control. It is available in different grades according to cleaning capacity, pH range, temperature condition, foam requirement and application system. Each batch is inspected for appearance, pH value, alkalinity, degreasing efficiency, rust prevention and stability before shipment.
We provide complete export documents including COA, TDS and SDS for quality traceability and customs compliance. Our technical team can recommend the most suitable grade and dosage according to your cleaning system, material condition and destination country regulations.
POINTS FOR ATTENTION
ORDER INSTRUCTIONS
1. Confirm Cleaning System and Material Condition
Please inform us of your application field, metal material, cleaning method, temperature, oil type, required cleaning level and production line condition. We will recommend the most suitable neutral degreasing powder and degreaser grade.
2. Trial Sample and Laboratory Evaluation
We can provide trial samples for cleaning test, rust prevention test and compatibility evaluation. Customers may test degreasing efficiency, surface condition, rust prevention and stability. Sample COA and SDS will be attached.
3. Confirm Packaging, Quantity and Export Terms
Standard packing: 25kg bag / drum / carton, IBC tank. Custom shipping marks and pallet reinforcement available. Quotation under FOB / CIF / DDP is acceptable. Standard export data: HS Code 3824.9999, non-hazardous. Required customs documents: commercial invoice, packing list, bill of lading, certificate of origin, COA and SDS.
4. Delivery and After-sales Technical Support
Each batch is supplied with COA, TDS and SDS. Our technical team supports grade selection, dosage adjustment, process optimization and on-site guidance, and assists with import declaration information for destination ports.
Trial Order Tip:
For new customers, we recommend a small trial batch first to verify neutral degreasing powder and degreaser performance in your actual cleaning system and pre-review export documents before bulk order.
For new customers, we recommend a small trial batch first to verify neutral degreasing powder and degreaser performance in your actual cleaning system and pre-review export documents before bulk order.
USAGE NOTES
Dosage Control:
The recommended dosage varies by application, typically from 2% to 10%. Start from lower dosage and adjust according to cleaning test and production condition.
The recommended dosage varies by application, typically from 2% to 10%. Start from lower dosage and adjust according to cleaning test and production condition.
Application Method:
Apply by spraying, dipping, ultrasonic cleaning or washing according to grade and production line condition. Ensure uniform contact with contaminated surface.
Apply by spraying, dipping, ultrasonic cleaning or washing according to grade and production line condition. Ensure uniform contact with contaminated surface.
Compatibility Check:
Before mass production, test compatibility with metal material, auxiliary agent and processing condition. Observe cleaning efficiency, rust prevention and surface condition.
Before mass production, test compatibility with metal material, auxiliary agent and processing condition. Observe cleaning efficiency, rust prevention and surface condition.
Process Condition Consideration:
Adjust grade and dosage according to metal material, oil type, cleaning method, temperature and required cleaning level. Control solution concentration and cleaning time properly.
Adjust grade and dosage according to metal material, oil type, cleaning method, temperature and required cleaning level. Control solution concentration and cleaning time properly.
Storage & Sea Freight Guidance:
Keep sealed in a cool, dry and ventilated warehouse. Avoid direct sunlight, moisture and high temperature. It is non-dangerous goods for shipping.
Keep sealed in a cool, dry and ventilated warehouse. Avoid direct sunlight, moisture and high temperature. It is non-dangerous goods for shipping.
Safety Operation:
Wear protective gloves, goggles and protective clothing during handling. Avoid contact with skin and eyes. If splashed into eyes, rinse with plenty of clean water immediately.
Wear protective gloves, goggles and protective clothing during handling. Avoid contact with skin and eyes. If splashed into eyes, rinse with plenty of clean water immediately.
COMMON FORMULAS
| Application Type | Main System Components | Recommended Grade |
|---|---|---|
| General Metal Cleaning | Neutral degreasing powder, water, auxiliary agent | ND-100 |
| Electroplating Pre-treatment | Neutral degreaser, water, auxiliary agent | ND-200 |
| Painting Pre-treatment | Neutral degreasing powder, water, auxiliary agent | ND-300 |
| Aluminum Profile Cleaning | Neutral degreaser, water, auxiliary agent | ND-400 |
| Stainless Steel Cleaning | Neutral degreasing powder, water, auxiliary agent | ND-500 |
| Industrial Equipment Cleaning | Neutral degreaser, water, auxiliary agent | ND-600 |
| Ultrasonic Cleaning | Neutral degreasing powder, water, low foam agent | ND-100 / ND-500 |
| Custom Cleaning System | Customer cleaning system and application requirement | Custom Neutral Degreasing Powder & Degreaser |
Formula Guidance:
Use ND-100 for general metal cleaning, ND-200 for electroplating pre-treatment, ND-300 for painting pre-treatment, ND-400 for aluminum profiles, ND-500 for stainless steel and ND-600 for industrial equipment. The dosage should be confirmed by cleaning test and production result.
Use ND-100 for general metal cleaning, ND-200 for electroplating pre-treatment, ND-300 for painting pre-treatment, ND-400 for aluminum profiles, ND-500 for stainless steel and ND-600 for industrial equipment. The dosage should be confirmed by cleaning test and production result.
COMMON PROBLEMS IN DOWNSTREAM PRODUCTION
Insufficient Degreasing
Unsuitable grade, insufficient dosage, low temperature or short time causes poor cleaning.
Solution: Select suitable grade, increase dosage, raise temperature and extend cleaning time.
Metal Corrosion or Blackening
Wrong pH, unsuitable grade or long immersion causes corrosion risk.
Solution: Control pH range, select neutral grade and reduce immersion time.
Foam Problem
Unsuitable grade, high foam agent or high agitation causes foam overflow.
Solution: Use low foam grade, reduce agitation and add anti-foam component.
Poor Rust Prevention
Insufficient rust prevention component, wrong pH or long air exposure reduces protection.
Solution: Increase rust prevention component, control pH and dry surface quickly.
White Residue on Surface
Insufficient rinsing, high concentration or wrong auxiliary agent causes residue.
Solution: Increase rinsing times, reduce concentration and check auxiliary compatibility.
Uneven Cleaning Result
Poor solution circulation, low temperature uniformity or unsuitable grade causes uneven result.
Solution: Improve solution circulation, optimize temperature and select suitable grade.
Customs Detention Due to Mismatched Documents
Incorrect HS code or SDS information triggers inspection and detention at destination ports.
Solution: Confirm destination country regulations before order. Standard export data: HS Code 3824.9999, non-hazardous. We supply consistent full-set SDS / COA documents.
High COD Load in Wastewater
High organic content or excessive dosage increases wastewater treatment load.
Solution: Optimize dosage, use concentrated grade and cooperate with wastewater treatment.
Quick Conversion Calculator
Currency Exchange
Result: 0
Weight Conversion
Result: 0
Volume Conversion
Result: 0
Container Freight
Result: 0
Length Unit
Result: 0
Density Calculator
Result: 0
Price Per Ton
Result: 0
Packing Calculator
Result: 0
FAQ
PRICE INFORMATION
- Quotation Basis: CMC price depends on product grade, viscosity, substitution degree, order quantity and delivery terms.
- Price Validity: All quotations are subject to market raw material fluctuation. Normally valid for 7 days unless otherwise specified.
- Price Contains: The quoted price covers product cost and standard export packaging. Freight, insurance and export charges are calculated separately according to Incoterms.
- Tax & Invoice: Commercial invoice for export will be provided. Relevant export tax formalities can be handled.
- Payment Discount: Better price can be offered for larger repeated orders. Please contact us for the latest formal quotation.
DELIVERY TIME & SHELF LIFE
- Production Lead Time: 7–15 working days after receiving your deposit, subject to factory production schedule.
- Shipping Arrangement: After production completion, we will book container and arrange shipment. Port space availability may affect the departure date.
- Transit Time: Sea transit time varies according to destination port, generally ranges from 15 to 45 days.
- Shelf Life: 24 months from production date when stored under proper dry and cool conditions with original sealed packaging.
- Storage Warning: Once the bag is opened, please consume as soon as possible and keep away from moisture, high temperature and direct sunlight.
PRODUCT QUALITY
- Raw Material Inspection: All raw materials are strictly inspected before entering production line to guarantee stable base quality.
- In-process Monitoring: Continuous online monitoring during production for viscosity, substitution degree and moisture content.
- Batch Test: Every finished batch will be sampled and tested before delivery. Qualified report will be provided together with shipment documents.
- Consistency Control: Automated production lines reduce batch difference, ensuring stable performance for repeated orders.
- Quality Support: We accept third-party inspection before shipment. Technical team offers after-sales technical support for quality related issues.
ABOUT US
- Headquartered in Shijiazhuang: Based in Shijiazhuang, Hebei, a globally influential fine chemical production hub with huge capacity and full industrial chain to ensure stable raw materials and bulk supply.
- Geographic Advantage: Convenient inland transport near Tianjin and Qingdao ports, supporting fast container shipment and competitive export logistics cost.
- Full-chain Supplier: One-stop provider of fine chemical additives and matching production equipment, custom service available beyond cellulose ethers.
- Technical Team: Professional team supplies formula consultation, sample testing and product selection for various industrial projects.
- Global Export: Years of export experience, providing reliable goods, full export documents and timely after-sales technical support.
相关产品及设备
USEFUL LINKS
- AIChE https://www.aiche.org/
- IChemE https://www.icheme.org/
- Cheresources https://www.cheresources.com/
- NIST Chemistry WebBook https://webbook.nist.gov/chemistry/
- AspenTech https://www.aspentech.com/
- DECHEMA https://www.dechema.de/en.html
- ChemEngPlanet https://www.chemengplanet.com/
- PubChem https://pubchem.ncbi.nlm.nih.gov/
- Chemical Processing https://www.chemicalprocessing.com/
- ChemIndustry https://www.chemindustry.com/
- PharmaChemEngineer https://www.pharmachemeng.com/
- GlobalSpec https://www.globalspec.com/